Bone Paste Plus /3,63 kg

Bone Paste Plus ist eine Mischung aus Zement, Puzzolan und Polymer, die speziell zum Füllen von Hohlräumen in handwerklich gegossenem Beton entwickelt wurde. Die Paste enthält keine großen Partikel und ist daher weich und geschmeidig, so dass sie Löcher und Hohlräume leicht füllen kann. Der einzige notwendige Zusatzstoff für die Bone Paste Plus ist Wasser, da das Polymer bereits in die Formel eingearbeitet ist. Pigmente können hinzugefügt werden, um den gewünschten Farbton zu erzielen.

Geben Sie zwischen 1/4 und 1/3 Tasse Wasser pro 1 Tasse Bone Paste Plus hinzu und mischen Sie es zu einer joghurtähnlichen Konsistenz. Wenn Sie mit einer Farbe aus der Buddy Rhodes Signature Color Collection™ pigmentieren, geben Sie etwa 1,5 Teelöffel Pigment auf eine Tasse Bone Paste Plus.

Bone Paste Plus enthält keinen Sand. Das bedeutet, dass es eine andere Oberfläche und Farbe als der Grundbeton ergibt. Beim Füllen größerer Hohlräume können Sie 1 Teil feinen Sand zu 1 Teil Bone Paste Plus hinzufügen, um Schrumpfrisse zu reduzieren.

Instructions

Mixing Instructions

Add between 1/4 to 1/3 cup of water per 1 cup of Bone Paste Plus and mix to a yogurtlike consistency. Bone Paste Plus does not contain any sand. This means it will produce a different surface and color finish than the base concrete. When filling larger voids, you can add 1 part fine sand to 1 part Bone Paste Plus to reduce shrinkage cracks.

Application

The process is similar to applying drywall compound. Bone Paste Plus is applied to your finished piece to fill in holes, allowed to dry (typically overnight), and then polished away. Some shrinkage of the material will occur as it dries. For this reason, fill voids larger than 6mm a little at a time, allowing time for the material to dry between layers.

Various tools and applicators can be used to apply Bone Paste Plus depending on the desired look. You can use a drywall knife, putty knife, plastic spreaders, sponges, or even cloths to apply. If you are going for a multicolor effect, such as in the Craftsman Mix Press Technique, you can apply multiple colors of Bone Paste Plus, one after another, wiping each in a different direction after the previous layer has dried. Be sure to apply a full "skim coat" of the final color,; not so much that you will have to polish forever, but enough to assure that you fill all the voids.

Pigment
Buddy Rhodes Bone Paste Plus can be colored with any of the Buddy Rhodes pigment collection to almost any desired color. When pigmenting with a color from the Buddy Rhodes Signature Collection™, add approximately
1.5 teaspoons of pigment to 1 cup of Bone Paste Plus.

Polishing and Sanding

You'll likely want to sand or polish Bone Paste Plus off after it has dried to make it flush and smooth with the concrete surface. It is best to begin the polishing process between 24 and 48 hours after applying the last
layer. You can use 120-200 grit diamond pads at this stage. After 48 hours the material will become quite hard, requiring coarser diamond abrasives and a lot more work to remove, so plan to do your polishing during that
window of time and have your polishing tools and materials ready. We recommend wet polishing if possible.