Free Form™ AIR FAST /3,08 kg

Free Form™ AIR FAST ist eine einfach zu verwendende Epoxidharzknete, die in wenigen Minuten zu einem harten, starken und extrem leichten Kunststoff aushärtet. Die Teile A und B werden in gleichen Mengen dosiert und von Hand gemischt. Bei Raumtemperatur beträgt die Verarbeitungszeit 6 Minuten für eine 60-Gramm-Masse und die Verarbeitungszeit 30 Minuten (klebfreie, harte Oberfläche). Die Epoxidknete lässt sich leicht mit UVO™-Farbpigmenten einfärben. Sie können die Knete glätten, strukturieren, modellieren oder stempeln, während sich Epoxidharzkitt in seinem "grünen" Zustand befindet. Ausgehärtetes Epoxidharz ist leicht genug, um im Wasser zu schwimmen, und kann leicht geschnitzt, geschliffen, geformt und bemalt werden. Es ist mit den Originalprodukten Free Form™ AIR, Free Form™ AIR HT und Free Form™ AIR Fire Safe kompatibel.

FEATURES

Anwendungen: Free Form™ AIR FAST wird für schnelle "Grobformungs"-Projekte, zum Ausfüllen von Hohlräumen und für Reparaturanwendungen verwendet. Epoxidharz haftet an einer Vielzahl von Kunststoffen (Urethan, PVC usw.), Metallen, Holz, EPS-Schaum, Papier, Keramik, Gips usw. Es kann für eine Vielzahl von schnellen Reparaturen verwendet werden, einschließlich Reparaturen im Wasser; es härtet unter Wasser aus.
Epoxy Tooling - Verwendung als Abrundungsmaterial oder für den Vorrichtungsbau.

Laminieren - Free Form™ AIR FAST Putty zwischen Schichten aus EpoxAmite™ Laminier-Epoxid und Glasfasergewebe, Kohlenstoff oder anderen Fasern zur Herstellung von leichten Verbundteilen.

- Dicke 1,27 cm - Topfzeit 6 Minuten, Verarbeitungszeit 30 Minuten, vollständige Aushärtung in 24 Stunden.
- Dicke 0,95 cm - Topfzeit 8 Minuten, Verarbeitungszeit 45 Minuten, vollständige Aushärtung innerhalb von 24 Stunden.
- Dicke 0,32 cm - Topfzeit 10 Minuten, Verarbeitungszeit 2 Stunden, vollständige Aushärtung innerhalb von 24 Stunden.

Mischungsverhältnis nach Volumen 1A:1B - Shore-Härte 60D - Farbe Grau

Instructions

Safety- Use in a well-ventilated area (“room size” ventilation). Generally, if you use any epoxy system on a regular basis, wearing a NIOSH approved respirator is advised. Wear safety glasses, long sleeves and rubber gloves to minimize skin contact. Wear nitrile or vinyl gloves only.

This Product Should Be Mixed and Applied in Small Increments- material is mass sensitive. The more material you mix at one time, the hotter it gets and the less time you have to work with it. Free Form™ AIR FAST generates a significant exotherm (heat) when mixed. Mix and apply only in small amounts (ping-pong ball size) at a time. You can always mix and apply more as you go along. Mixing and applying anything over a “tennis ball” size amount at one time may be too hot to handle and cause burns. If you sense that the material is too hot to handle, stop using immediately.

Preparation- Materials should be stored and used at room temperature 23° C. This product has a limited shelf life and should be used as soon as possible. Mixing should be done in a well-ventilated area. Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. If making a 2 or more piece mother mold, apply appropriate shim apparatus to rubber mold exterior. Because no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.

Applying A Release Agent- For releasing epoxy from non-porous surfaces such as resin, metal, glass etc., use Sonite Wax™ available from Form X to prevent adhesion.
This product is mixed by hand. You must wear gloves when mixing this material, wearing vinyl gloves reduces inhibition risk.

MIXING & MEASURING

Measuring - Free Form™ AIR FAST putty comes as two parts. Dispenseequal amounts (ping-pong ball size, for example) of Part A and Part B. These products have a limited shelf life and should be used as soon as possible.

Mixing - Knead parts together aggressively to a uniform color. Mix for no more than 60 seconds and apply quickly to surface.

APPLYING & LAMINATING

Using Water as a Bonding Primer -Before applying Free Form™AIR FAST, spray a light mist of water over all surfaces. Do not allow water to pool.

Applying- Mixed Free Form™ AIR FAST is a dough that can be applied up to 1.27 cm thickness. Mix only enough Free Form™ to be used at one time. Free Form™ AIR FAST will bond to itself.

Laminating - Free Form™ AIR FAST can be used in conjunction with EpoxAcoat™ surface coat and EpoxAmite™ laminating resin to create a strong and lightweight composite tool or mold.

SMOOTHING SURFACE & PAINTING

Smoothing Surface- Epoxy surface can be smoothed with isopropyl alcohol.
Painting- Cured Free Form™ AIR FAST can be painted and /or primed and then painted with acrylic enamel paints. Let paint fully dry before putting part into service.

CURING & HEAT RESISTANCE

Cure Time - Refer to specified Cure Times in the Product Overview section at room temperature depending on mass. Cured material will be hard and unable to penetrate with a fingernail. Cured epoxy can now be dry sanded. If machining or sanding, wear NIOSH approved mask to prevent inhalation of particles. Pot Life and Cure Time values are dependent on mass and mold configuration, as epoxies are mass-sensitive.

Heat Resistance-Fully cured putty with a minimum thickness of 1.27 cm will resist temperatures up to 63°C.

Removing Uncured Free Form™ AIR FAST Epoxy Putty - Remove as much uncured material from the surface as possible. Clean any residue with soap and water.

Optional - Use E-POX-EE KLEENER™Available from Form X.